How it works Downloads Pricing FAQ
Frequently asked

Frequently asked questions

Answers about the model, the quantities, the plans and the AI — and where Constructio ends and Zanatio begins.

Model and quantities

Yes — export it as IFC (2x3 or 4) and drop it on the "Quantities from IFC" page. Walls, slabs, columns, beams, stairs, windows, doors and rooms are measured; you check the result in 3D, enter prices and the quantities become the forecast of your cost items. With a clean model (closed solids, no overlapping walls and slabs) the quantities follow the model exactly; how close they are to what gets built depends on the model, so treat them as an estimate, not a bill of quantities.
Any program that exports IFC (2x3 or 4): the file is read in your browser, not uploaded. Inside SketchUp the extension also draws and names the elements; the Revit and Rhino extensions are coming soon.

Revit and Rhino are coming soon, then Blender. From Archicad and other programs you can upload IFC today.

No. The IFC file is read in your browser; only the measured totals, the list of items and — if you send it to the 3D model — the floor plan and a compressed copy of the 3D geometry are saved with your project.
Preliminary quantities are rough engineering assumptions derived from floor areas (shown with ≈). They help you see the size of the budget early; when the structural design and bill of quantities arrive, you correct them. The system never overwrites a quantity you corrected.
No — it is a visual model to understand the building, its rooms, floors, sun and shadows, and to present it to your client. Construction always follows the approved architectural and structural designs.
Yes, for a project in Estonia: design conditions and designs, the building permit (ehitusluba) with owner’s supervision and the notice of commencement in the Building Register, site registration for large sites, apartment ownerships at the land register and, at the end, the permit for use (kasutusluba). Constructio plans these steps with their costs; the applications themselves are made in the Building Register (EHR).

SketchUp, Revit and Rhino extensions

Yes. It works with a Constructio account: 30-day free trial, then a License. In SketchUp you draw walls, openings with doors and windows, stairs, roofs, slabs, columns, beams, railings, storeys and rooms; each one is a typed IFC element with its material and name. It lists the problems in the model, shows a quick take-off and exports IFC for the cost. You draw with commands and the same input always gives the same result. With an AI package, DWG to model reads your DWG drawings and builds the model they show; everything else in the extension works without AI. All about the SketchUp extension
Coming soon. The add-in is built, but we have not yet tried it inside Revit, so we do not yet know how the models it sends behave on the site. Until then, export IFC from Revit (its own IFC export, IFC 2x3 or IFC 4) and upload the file on your project's “Quantities from IFC” page. Revit add-in →
Coming soon. The plug-in is built, but we have not yet tried it inside Rhino, so we do not yet know how the models it sends behave on the site. Until then, upload an IFC file if your Rhino set-up exports one, or model in SketchUp with the extension. Rhino plug-in →
They work during your account’s 30-day free trial. After that they need a License (or a coupon code): without one an extension signs out the next time it checks and cannot sign in again until the account has a License. Pricing →
No. It reads the open model on your computer to show the checks and the take-off. Only the IFC file you upload yourself reaches Constructio, and even that is read in your browser.

AI, drawing and Zanatio

No. Constructio is a tool: you model with the extension’s commands, the same input always gives the same result, and the measuring, cost and work plan run on that model. It does not design a building or draw a plan from scratch for you. With AI Pro, DWG to model reads a drawing set you already have and builds the model it shows: it converts your drawing, it does not design.
Only the essentials — the extension shows the same short list before you send:
  1. Scale 1:1, units mm or cm.
  2. Every floor plan has its title written: “GROUND FLOOR PLAN”, “FIRST FLOOR PLAN”…
  3. Walls as two parallel lines on their own layer; columns and shear walls as closed rectangles on their own layer.
  4. Doors and windows as blocks with tags (D01 90/210, W01 120/140, sill P:90).
  5. Every plan has its floor level written (±0.00, +3.00); if possible, a section in the same file.
  6. Stairs with their step numbers and a note like “M 18x16.66/100”.
  7. Furniture, hatching, dimensions and grid lines on their own layers; if the sheets are in separate files, select them all together.
It helps you run the project: it answers questions about phases, items, purchases and the model, writes the team’s morning notes and reads plan photos. It never shows prices to people who should not see them, and it does not design or draw plans. Its allowance is part of your plan; uploading models, quantities, the work plan and costs never use it.
Constructio is the tool: you model, measure and manage the site yourself — quantities, cost and the work plan. Zanatio is Talivio’s generative AI expert: you write what you need, it plans the job, draws it with ready modelling tools, checks it, and you approve the result. The design intelligence lives in Zanatio; Constructio’s AI only turns an existing DWG drawing into a model. zanatio.talivio.com →
Neither. They are sold separately and each works on its own. When you use both, Zanatio can use Constructio’s tools; without Constructio it works with its own.

Plans, prices and account

In a project in Estonia, average material prices with their sources are filled in as a starting point (VAT excluded) and follow the Statistics Estonia construction price index for building materials. Replace them with your quotes or your own price list; the prices you enter become your library for the next project.
The Free plan is for trying Constructio for 30 days from sign-up. After that nothing is deleted: you can open your projects, view them and export them to Excel. To keep editing or start new projects, choose the License or enter a coupon code.
Sign in and enter it on your account page, under Plan and billing. The code opens the License for the period it gives (for example 3 months, or with no end date); a longer License you already have is not shortened.
License: up to 2 accounts, Pro: up to 4, AI Pro: up to 5 — you included, and the people you invite. They are counted across all your projects, so the same person in several projects counts once. For more accounts, contact us about the Enterprise plan.
All three include unlimited projects, every site feature, the SketchUp extension and the mobile app. The License is for up to 2 accounts. Pro adds model to drawing sheets — plans, sections and elevations drawn from your SketchUp model — for up to 4 accounts. AI Pro adds DWG to model, where AI turns your DWG drawings into a SketchUp model, a larger AI allowance and up to 5 accounts. During the free trial you can try model to drawing sheets too.
The same plan, rights and accounts. The yearly plan is paid once a year and costs 2 months less than twelve monthly payments. The AI allowance renews every calendar month on both.
Only assistant chat, reading plan photos and DWG to model. Uploading models, quantities, the work plan and costs never use AI. DWG to model runs on a larger model, so each of its tokens counts 8 AI units; assistant chat and plan photos count one.
Yes, prices are shown in euro with VAT included.

More questions · Pricing →

Sharing and the mobile app

Share the model: send a link to your client or consultant and they see only the 3D model and the section plan, in the app or on the web — no costs or work plan, and they do not count towards your accounts.
Yes, for Android and iOS, with the same account as the website: this week’s phases, what to order, what arrived and what was paid, and site photos sent straight to the phase. The 3D model opens in the app read-only; editing stays on the web. Other ways to install
Start for free

Free for 30 days, no card needed. After that your projects stay read-only: you can still open them and export them to Excel.